These instructions apply to the following models:
Load and Unload Instructions:
Step 1. Align arrow on spool with eyelets on drum.
Step 2. Insert two ends of one piece of nylon trimmer line into holes
on top of spool.
Step 3. Push line into holes until line feeds through eyelets on side of drum.
Step 4. Hold drum securely and turn spool with direction of arrow to
wind line into spool.
Step 5. Ready to operate.
Removal of Line From Head
Step 1. Hold drum securely and turn spool with direction of arrow until
remaining line retracts fully into drum.
Step 2. Grasp loop on top of spool and pull remaining line from spool.
Line Specifications:
Note:
If line is difficult to remove from head – turn spool in opposite direction
of arrows on cover to loosen tension and repeat step 2.
